First team Powerhouse Nitro Install continued

The system was delivered yesterday. Typical for R and L trucking, the boxes arrived busted and open. I looked over everything as carefully as I could and then signed the bill of lading with a detailed exception about the box condition, possible missing parts and possible damage.

The driver was a really nice guy and I gave him our old portable hoop. It worked out great for him and for us. After he left I started to get to work on emptying the boxes and sorting through the components. Wouldn’t you know that the one thing I was really keen on – the template for the bolts in the base – was missing. I called First Team and by my description they were pretty sure it fell out in transit. They told me I could make one out of plywood or they could send one overnight. My pour is scheduled for 10 am the next day so overnight was not going to work. Quick call to Rand L and they said they would look and IF they find it they will bring it over. Not good enough – I need to know one way or the other. I call the specific dispatcher and get him to agree to call me after he talks to the driver. Net result is they do not have the template and I am off to the depot to get some plywood cut.  I need a 12″ x 12″ square and inside I will drill 9″ x 9″ on center.  I do this by making diagonal marks to identify the center and then drop down1.5″ from each end where it intersects the line. I then drill a 5/8″ hole with a speed bore.

Above is a picture of the assembled template with the bolts installed ( facing in ) . I then assembled the base so I could test my template before the pour and the end of any opportunity to make changes. The great news i that it fits perfectly.

Net up the pour and a day of rest while it hardens

Leave a Reply